Search results
326
Accessory
Interface cable, AFG/AFTI to MultiTest-dV, Stand reverse & RS232
351-103
Interface cable, AFG to MultiTest-dV (May 2020 - now) test stands & Vortex-dV (June 2020 -now) for stand reverse and RS232 data transfer to stand for onward use with VectorPro-Lite software.
Comprises a 15-pin D-socket to 15-pin D-plug.
327
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
328
Accessory
Interlock override plug
PDV12034-01
Plug for use with software-controlled "-i" and "-xt" systems. It allows an interlocked guard to be used in non-interlock mode.
Helps when first setting up trial test programmes.
329
Accessory
432-662-1.5 Gold torque reference bottle 1.5 N.m
432-662-1.5
The Torque Reference Bottle (also known as ' Gold Bottle') provides a means of quickly verifying the calibration of motorised torque measuring systems Helixa and Vortex. Its magnetic clutch repeatedly slips at a factory-set, specified torque value. The…
330
Accessory
Interface cable, BFG (2003 - now), Orbis Mk1 (2003-2007), Digimatic to a Mitutoyo device
351-055
Connects the BFG & Orbis Mk1 to Mitutoyo digimatic devices.
Comprises 15-pin male D connector to 10-pin IDC female socket.
331
Accessory
Compression Plate, Self-levelling, Hardened & Ground, 70 mm, 5-16 UNC
432-350
Self-levelling compression plates are ideal for general compression testing on a range of materials and finished products. Self-levelling allows parallelism to be set for those applications where it is critical to accurately measure the deformation of a…
332
Accessory
Medium Vice Grip - Single Action, 1 kN, 52 mm opening, QC-20 fitting
Mec240k-S50
MEC 240k-S50 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manualy set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1…
333
Accessory
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
334
Accessory
Upper Key-operated Chuck, square drive, for use with Vortex sensors
432-444
Upper ‘key-operated’ 4-jaw Chuck (small)
Fitted with a square-drive adapter for connection to 'Vortex' torque sensors. Supplied with dedicated chuck-key and 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
335
Accessory
CrimpTest-1 kN Calibration Bracket
432-671
The calibration bracket is designed for verifying the accuracy of the CrimpTest-1 kN loadcell readings. For the user, this ensures that a unit does not continue to be used with inaccurate readings across its range. The main bracket should be bolted to a…
336
Accessory
Sample cutter 15 mm wide
PSV13007
Sample cutter for preparing peel and tensile samples of film/paper. Adjustable blade spacing upto 70 mm, or quickly set at 15 mm or 1 inch wide with the width adjustment block.
Includes spare blades, width adjustment block and hardened protective mat on…
337
Accessory
432-662-1.0 Gold torque reference bottle 1.0 N.m
432-662-1.0
The Torque Reference Bottle (also known as ' Gold Bottle') provides a means of quickly verifying the calibration of motorised torque measuring systems Helixa and Vortex. Its magnetic clutch repeatedly slips at a factory-set, specified torque value. The…
338
Case study
TerraFixing's use of the Mecmesin OmniTest 25 for direct air carbon capture technology
TerraFixing is dedicated to combatting climate change through affordable and scalable Direct Air Carbon Capture (DAC).
339
[Page extract]
How wing tear testing is performed
Specimen geometry and preparation
Testing accuracy begins with correct specimen preparation. For wing tear tests, samples are cut into shapes with two projecting wings joined by a narrow central region where the tear initiates.
340
[Page extract]
Peel test procedure - step by step
Prepare the specimen: Cut and condition according to the relevant standard.
Set up the machine: Install the correct fixture for the test type.
341
[Page extract]
Standards for texture compression testing
ISO 16305 - Butter firmness
Specifies a method for determining butter firmness under controlled conditions.
342
[Page extract]
Testing methods for different materials
Rubber and elastomers
Rubber and elastomers are valued for their flexibility and resilience.
343
[Page extract]
How is the 135° peel test performed?
Specimen preparation
Test specimens are usually strips cut from the sealed edge of a tray or container.
344
[Page extract]
What is the Concora crush test?
Definition and overview
The Concora Crush Test (CCT) is a standardised method used to measure the crush strength of corrugated medium, specifically the fluted inner layer of corrugated board.
345
[Page extract]
Methods of conducting ergonomic strength tests
The choice of method depends on whether the focus is workplace assessment, clinical rehabilitation, or research studies.
346
[Page extract]
Key methods for compressive strength testing
Several methods are used to determine the compressive strength of materials, and the appropriate test depends on the material and the specific industry requirements.
347
[Page extract]
Importance of ergonomic strength testing
Ergonomic strength testing is essential for ensuring that human performance matches task requirements. This alignment reduces the risk of musculoskeletal injuries and improves long-term health outcomes.
348
[Page extract]
Types of flexure tests
Different flexure testing setups are chosen based on the nature of the material, the required precision, and the industry standards being followed.
349
Case study
Adjustable spectacles
Requirement
Adlens manufacture adaptive lenses used within spectacles that are distributed throughout the world. The lenses change power at the turn of the dial located at the side of the spectacle.
350
[Page extract]
How is compression texture testing performed?
Test methods and parameters
A typical test places the sample on a stable platform beneath a compression plate or probe.