Search results
1276
[Page extract]
Peel testing standards
Peel testing is defined by international standards to ensure accuracy, repeatability, and comparability of results. Common standards include:
1277
[Page extract]
Key testing standards
Compliance with recognised international standards ensures that needle penetration testing is consistent, reliable, and repeatable across different facilities.
1278
[Page extract]
Introduction to five-point bend testing
The five-point bend test is a specialised method for assessing the mechanical performance of structural panels, particularly their resistance to planar shear forces.
1279
[Page extract]
Why is the 135° peel test important?
Seal strength testing plays a vital role in packaging quality control.
1280
[Page extract]
Introduction to extrusion testing
Extrusion testing is an essential method in the food industry for measuring the texture and flow behaviour of semi-solid and visc
1281
[Page extract]
What is bulk analysis testing?
Definition and purpose
Bulk analysis testing assesses the mechanical properties of particulate materials as a collective whole, rather than analysing individual particles. This includes powders, granules, pellets and similar materials.
1282
[Page extract]
Introduction to compressive burst testing
Compressive burst testing is a specialised method for determining the maximum internal pressure a container can withstand before structural failure.
1283
[Page extract]
Applications of compressive modulus testing
Compressive modulus data is essential in sectors where compressive stiffness determines performance and safety.
1284
[Page extract]
Introduction to climbing drum peel testing
Climbing drum peel testing is a specialised method used to measure the adhesive strength between bonded materials, particularly in flexible-to-rigid substrate combinations such as aluminium skins bonded to honeycomb cores.
1285
[Page extract]
Comparing adhesion test methods
While the peel wheel test maintains a constant 90° angle, other tests such as the 180° peel test are also widely used.
1286
Case study
Kiểm tra lò xo bộ hãm máy bay
Yêu cầu Bộ phận Bánh xe và Phanh máy bay tại British Airways plc chịu trách nhiệm sửa chữa và đại tu bộ phận phanh máy bay trên các máy bay Boeing 737, 747, 757, 777 và Airbus A319, A320 và A321.
1287
Case study
Độ kết dính của tấm xây dựng
Yêu cầu SIPS Frames UK Ltd (SIPS Eco Panels) là một trong những nhà sản xuất Hệ thống Panel cách nhiệt có kết cấu độc lập hàng đầu của Vương quốc Anh, để sử dụng trong việc xây dựng các nhà lắp ghép do các nhà tự xây dựng.
1288
[Page extract]
What is strip torque testing?
Definition and importance
Strip torque testing measures the torque required to continue rotating a threaded closure beyond its normal sealing point until the thread strips or the closure fails.
1289
Accessory
Lower Torque Fixing Table, Vortex stands
432-320
Lower Torque Fixing Table.
Offers highly versatile holding of containers and specimens when torque testing. Fully adjustable between 10 - 190 mm opening (diameter) to accommodate a variety of forms.
Four rubber-coated, threaded pegs are supplied as…
1290
Accessory
Chisel Point - 8 mm diameter, 500 N, 10-32 UNF
432-360
Chisel Point probe of Ø 8mm with angle of 60° typically used for puncturing and splitting samples.
Maximum compressive force is 500 N.
Fitted with a 10-32 UNF female thread for connection to loadcell.
1291
Accessory
3-Point Bend Jig, 20 kN, Steel, QC-20 fitting
432-266
A simple 3-point bend jig supplied as standard with a 5mm radius upper anvil (QC 20mm female connection) and two adjustable lower anvils also of 5mm radius.
Lower support beam is fitted with QC 20mm female connection suitable for mounting on single- and…
1292
Accessory
Fabric Grip, 200 N, 10-32 UNF
432-386
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 200N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1293
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
1294
Accessory
Multi-Jaw Grip, 500 N, M6
432-215
Used in tension tests the Multi-Jaw Grip is for holding round and irregularly shaped specimens by clamping on the outer surface or under a 'head'.
By turning the body of the grip the claw-type jaws can be opened and closed to get a secure grasp on a…
1295
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
1296
Accessory
Pin Chuck, 100 N, 10-32 UNF
432-382
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having 10-32 UNF female threaded hole & 10-32 UNF grub-screw
1297
Accessory
Digital gauge to PC input tool
432-234
The PC Input Tool allows transmission of a single reading from a digital gauge directly into Microsoft Excel.
It requires the use of the relevant interface cable:
* for AFG/AFTI/Tornado use cable 351-058,
* for BFG/Orbis use cable 351-055.
For use…
1298
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
1299
Accessory
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
1300
Accessory
38 mm Crosshead extension only
432-508
The dovetailed crosshead-extension allows the loadcell on a single-column MultiTest stand to be positioned further from the column to accommodate larger test samples or to fit deeper grips without hitting the column.
Load rating of the test stand is…