Components and assemblies

Our Mecmesin Multitest-dV tester has improved efficiency, accuracy and consistency of our in-house testing. Also the customer service / support has been very helpful throughout. We would definitely recommend Mecmesin.

Ashley Adlam, Quality Supervisor, Quality Control
Tecni Ltd.

“Only measuring up to a few Newtons of force with an AFG 2500 N was not enabling us to proceed with our investigation and Mecmesin kindly lent us a more sensitive AFG 10N which instantaneously improved the quality of data we were collecting.”

Alex Radford, Undergraduate Student (Department of Physics)
Durham University

This test system is perfectly suited to our needs, giving us the flexibility we require to perform multiple tests with the certainty of obtaining reliable, accurate results. Undertaking these quality measurements in-house means we are also saving significant costs, as we no longer require the services of external test laboratories.

Jordi Vives-Talló, Engineer
Ultra Magic

The Mecmesin instruments are always so easy-to-use and Mecmesin really understands what is going on in a laboratory like ours.

Tony Faure, Laboratory Manager
Bridgestone TG

Mecmesin has customer service which provide unwavering support for our questions and ALWAYS come through with the results and answers we have needed. This solution continues to open doors for us and grow with our needs. It was everything we didn’t know we needed and everything we could ask for. It is simple to use and can be mastered using very user-friendly software and conversions into the programs we use every day. I look forward to taking our next steps with Mecmesin!

Terri Lebow, Quality Manager
Vintech Industries Inc.

Longcroft Engineering has a requirement to accurately measure the force on springs for a wide variety of applications. Clients frequently request new concepts and designs, and Mecmesin has been able to provide the versatility and quality we require, so that we can serve these customers.

Colin Hurst, Quality Chief Inspector
Longcroft Engineering

Having an in-house test capability is essential when developing new processes and products. Having the Mecmesin tester at Cambridge Nanotherm has allowed us to reduce test cycles significantly. The software package also gives us the ability to analyse the subtle differences in adhesion mechanisms and also gives us the ability to produce detailed reports for our suppliers and customers.

Steven Curtis, Chief Engineering Officer
Cambridge Nanotherm Ltd

We use the MultiTest-x regularly, approximately 40 hours every week. It continues to be reliable and saves us money by enabling us to tests in-house. Mecmesin were able to offer advice regarding fixtures and designed an ideal solution for our testing needs, which remained competitively priced.

Tony Freeman, Director
William Lamb Footwear

We tried to find a solution provider for our application, however no-one was able to provide a clear test method and appropriate test fixtures. We chose Mecmesin as their product is very versatile and gave us the clear, reliable results. This unique system fits perfectly to our application.

Hyeong-kyun, Lee , Q.A. Team, Touch Screen Division,
JNTC

We have used Mecmesin products for a number of years, and they have proved very reliable. As such, Mecmesin was the natural choice when it came to buying new force testing equipment.

Andrew Reece, Design and Development Engineer
Parmeko PLC

We found the Mecmesin MultiTest 2.5-i very easy-to-use. The unit has been of great help to us in setting specifications and standards. As our suppliers are now fully aware of our capabilities we always receive the best natural products.

Pete Thompson, Director
Kookaburra Sport

Purchase of the MultiTest 50-xt has allowed us to extend the range of products we can test in-house and obtain more information about the failure mode of the samples.

Erica Moore, Test and EHS Manager
Amphenol

The Mecmesin 2.5-i has been of great use to IFPL in the testing of socket-type components and materials

Ben Salmon, Test Technician
IFPL

Amphibio has been using the Mecmesin Multitest 2.5i to assess the mechanical properties of single fibres, yarns and textiles made of various materials for their suitability in the sportswear and performance textiles market. We needed equipment that would be able to provide us with repeatable and reliable results whilst being easy to use. By using this equipment, we have been able to make key decisions going forward in our material development by determining yarns and fibres with the most suitable mechanical properties. The grips recommended to us as well as the software interface make testing efficient and easy, allowing us to obtain rapid results. Overall, we are extremely happy with the service offered by Mecmesin, particularly because they were able to accommodate our needs during difficult COVID times and were also able to offer us our desired equipment rental agreement period which fit with our budget.

Deana Tsang, Design Engineer
Amphibio Ltd

Not being an expert in force measurement, I have found Mecmesin to be an extremely capable partner in this field. They ensure that test solutions are found, they offer training in the use of the equipment and they are a competitive supplier of the service and calibration of all our measuring equipment.

Michaël Valdenaire, Quality Engineer
Soprofen Industrie

Tactile characteristics have become a very important aspect in TRV design. The Vortex-i has enabled Pegler Yorkshire to benchmark and assess new design proposals allowing detailed examination of dynamic characteristics and wear over prolonged use. As a result we can provide customers with TRVs of an increased quality and durability.

Sam White, New Product Development Design Engineer
Pegler Yorkshire

Use of the MultiTest 5-x has simplified and accelerated the testing of aircraft brake unit springs. Having input the parameters per the CMM into the unit, we were able to test a spring at the touch of a button and have a near instantaneous results without ambiguity. The machine has not only simplified the testing procedure, it has helped to improve the process and flow through the shop.

Lionel Fearon, Product Support Engineer
British Airways

Since we initiated this sample testing procedure, we have improved the consistency and level of quality of our products. The intuitive graphical illustration of the results helps us better understand the whole test and the nature of the torque characteristics, which assist in the design process.

Daphi Dai, R&D Laboratory Manager
Jabra GN Netcom

Prior to purchasing the machine, test patches were taken off safety nets before their due date and kept until a batch were sent to our suppliers, which involved parcelling up and visiting the post office to send away for testing. This was time-consuming and expensive. Now we can test as and when required. We chose Mecmesin because they were the most helpful when enquiries were made.

Ian Semple, Director
IPS Safety Netting

We purchased the MultiTest 10-i to test 80% of the springs which we have in our railcars. The system is very easy to use and the program is convenient to test. Also the support of A & D Korea was very positive.

SC Yoon,
Seoul Metropolitan Railway Transit Corporation