Search results
1001
Case study
Tensile testing on polyethylene film
Requirement
Eurofilm Mantzaris S.A. are a leading producer of polyethylene films used for packaging and agricultural applications.
1002
[Page extract]
ASTM D5602/D5602M-18
An important factor affecting the performance of many membrane roofing systems is their ability to resist static puncture loads. This test method provides a means for assessing static puncture resistance.
1003
[Page extract]
ASTM E1012-12e1
It has been shown that bending stresses that inadvertently occur due to misalignment between the applied force and the specimen axes during the application of tensile and compressive forces can affect the test results.
1004
Case study
Flat Quick-connect Termination
Requirement
A test system was needed to meet the requirements of test standard BS5057.
1005
[Page extract]
How is a three-point bend test performed?
Test setup and procedure
The test begins with preparing a specimen, often a rectangular bar, from materials such as plastics, composites, wood, or metals.
1006
[Page extract]
How to perform a breaking torque test
Required equipment and setup
Mecmesin offers a range of torque testing systems suited to different torque capacities and application requir
1007
[Page extract]
Mecmesin systems for top-load testing
Vertical load and axial resistance expertise
Mecmesin offers dedicated axial load test systems widely used for
1008
Case study
Kriket topu basınç deformasyon gücü ve kapak malzemesi çekme dayanımı
gereklilik Kookaburra, kriket ve hokey spor ekipmanları üretiminde uluslararası alanda tanınan bir liderdir. 1890 yılında kurulan şirket, inovasyon ve kaliteye gösterilen özen üzerine ismini oluşturmuştur.
1009
Case study
Glued cardboard packaging integrity
Requirement
Graphic Packaging International is a leading designer and manufacturer of food and beverage packaging.
1010
Case study
ROPP bottle cap closure torque test
Requirement
Brothers Drinks manufacture and co-pack a wide range of alcoholic and non-alcoholic beverages with both Roll on Pilfer Proof (ROPP) and crown bottle caps.
1011
[Page extract]
Compression
Compression testing is a way of determining how something will react when a compressive force is applied to it. It typically involves measuring the relationship between the applied force and how much the object deforms.
It is performed to:
1012
Case study
PVC pipe valve actuation torque
Requirement
Nawaplastic industries (Saraburi) Co. Ltd. manufactures and distributes a wide range of PVC pipes, components and fittings and associated products and services in plumbing, drainage and agricultural applications.
1013
Case study
Bitki Bazlı PLA Malzeme Şişelerinin Üstten Yük Testi
Gereksinim
Roquefort-les-Pins, Fransa'da bulunan BioPak Solutions, Polilaktik Asit (PLA) şişelerin üretiminde lider konumdadır. Şişeler yağsızdır, PET veya Bisfenol A içermez ve 0 karbon emici bitkilerden yapılır.
1014
Software
İmparator Kuvveti yazılımı
Emperor™ Force yazılımı İhtiyaçlarınıza uygun gerilim ve basınç testlerini tasarlamak ve özelleştirmek için neredeyse sınırsız özgürlüğe sahip kullanımı kolay yazılım. Mecmesin tarafından müşterilerimizle yakın işbirliği içinde geliştirilen Emperor™,…
1015
Case study
Olta misinası ve düğüm gücü
Gereksinim
Toit Fishing'in misyonu, güvenilirlik, işlevsellik, dayanıklılık ve çevresel sürdürülebilirlik temalarıyla balıkçılık araçlarını geliştirmek, iyileştirmek ve yeniden hayal etmektir.
1016
Sensor
Torque Sensors (ETS)
Torque sensors
The Enhanced Torque Sensors (ETS) range of interchangeable torque sensors are specially adapted for the HelixaPro and VortexPro test systems.
Plug and play for automatic calibration with availability to suit all requirements in capacities…
1017
Accessory
Mettler Toledo RS-P26 printer (UK)
432-502
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 230V with plug (3-pin square)…
1018
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+2Ko
MEC 240k- S30+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1019
Accessory
Peg Hook, 50 N, 10-32 UNF
432-399
The Peg Hook is fitted with 10-32 UNF female thread and supplied with a male grub-screw. It is designed for use in low-load applications where a small 'eyelet' needs to be held. The angled peg is ideal for quick and easy securing of the eyelet.
1020
Accessory
Extension Rod, 130 mm, 500N, 10-32 UNF
432-117
Extension rod 130mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1021
Accessory
Pneumatic Medium Vice Grip - Single Action, 1 kN, 30 mm opening, pair, QC-20 fitting
Mec240k-S30+Ko
MEC 240k- S30+kO (body only) :
A pair of pneumatically-operated, single-action Medium Vice Grips with an opening of 0-30mm depending on the jaw types selected (sold separately). Each grip is fitted with 1 manual jaw holder + 1 x 50 mm diameter…
1022
Accessory
Spring-loaded Pinch Grip with Chain Link, 10 N, QC-20 fitting
MecS205k
A Spring-loaded Pinch Grip designed for small-area contact (10mm x 10mm) to grip a delicate sample.
The sprung-loaded adjustable screw-mechanism allows an opening up to 3.4mm and acts in a pincer motion to secure specimens.
Fitted with a flexible chain…
1023
Accessory
Pinch Grip, 2 kN, QC-20 fitting
MecS470
The 2 KN Pinch Grip is fitted with 25mm high x 25mm wide pyramid jaw faces to ensure samples are held securely for tensile tests below 2 kN.
One jaw is fixed and the other jaw is on a spring-loaded hinge which opens to 10mm. Fast installation and…
1024
Accessory
Small Single-action Vice Grip, 200 N, QC-20 fitting
432-264
A general-purpose Single-action Vice Grip.
Ideal for testing low force flat specimens. The open side design facilitates easy loading of thin, non-rigid samples, which are clamped in place.
Fitted with 30 mm x 30 mm flat-faced jaws and rated to 200 N in…
1025
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…