Search results
1301
[Page extract]
How to conduct a Concora crush test
Step-by-step procedure
Specimen preparation - Cut medium to the required size, typically 152.4 mm by 25.4 mm strips, ensuring clean edges.
1302
[Page extract]
ISO 34-2 standards explained
ISO 34-2 specifies the Delft tear test procedure for vulcanised or thermoplastic rubber, ensuring testing is carried out under consisten
1303
Page
Contact sales
Thank you for contacting our sales team
One of our Technical Sales Engineers or your local partner will be in touch soon.
1304
[Page extract]
How bridge torque is measured
Bridge torque is measured by applying rotational force to a closure until the tamper-evident bridges shear.
1305
[Page extract]
Industry standards and customisation
Alignment with recognised standards
Mecmesin systems support compliance with globally recognised testing standards, including:
1306
[Page extract]
Application of standards in puncture testing
Standardised methods ensure test consistency and reliability across laboratories and production sites.
1307
Event
Tensile Testing for Wiring Harness Connections Webinar
The only way of really knowing the strength of a crimped terminal is to pull it.
1308
[Page extract]
BS EN ISO 12230
This European Standard specifies a method for the determination of the tensile properties of materials used as surfaces for sports areas.
1309
[Page extract]
BS EN ISO 376
BS EN ISO 376:2011 looks at the calibration of force-proving instruments used for the static verification of uniaxial testing equipment. These include tension and compression testing machines.
1310
Case study
Konaklamaya direnç için köklerin ankraj dayanımı testi
gereklilik Önde gelen bir Hollanda Üniversitesi, Teff (Eragrostistef) adı verilen glutensiz bir tahıl mahsulünün verimini ve kalitesini artırmak istedi. Teff, Etiyopya kökenli eski bir tanedir ve şimdi Avrupa'da yetiştirilmektedir.
1311
[Page extract]
ASTM C133-97
ASTM C133-97 outlines standardized test methods for determining the cold crushing strength and modulus of rupture of refractory materials.
1312
Case study
Kablo kanalı dayanım testi
Özel mühendislik örneği Müşterimiz kabloların ve optik fiberlerin yönlendirilmesi için borular ve kanallar üretmektedir. Bu tesislerin montajında üfleme, itme ve çekme teknikleri kullanılmaktadır.
1313
[Page extract]
ASTM D3578
Scope... 1.1 This specification describes certain requirements for natural rubber gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers natural rubber gloves used in handling contaminated medical
1314
[Page extract]
What is Young’s modulus?
Young’s modulus - also known as the modulus of elasticity or elastic modulus - defines how stiff a material is when a force is applied.
1315
[Page extract]
Introduction to tensile testing
Tensile testing is one of the most widely used methods in material science for determining the mechanical properties of materials under uniaxial tension.
1316
[Page extract]
Understanding corrugated cardboard resistance
The compressive resistance of corrugated cardboard depends on factors such as flute profile, board structure, and paper quality.
1317
[Page extract]
ISO 4049
This document specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or
1318
[Page extract]
Real-time data analysis and reporting
Mecmesin’s software platform offers live monitoring and evaluation of test performance:
1319
[Page extract]
What is the 135° peel test?
The 135° peel test is a method for measuring the seal strength of semi-rigid packaging, typically where a flexible lid is sealed onto a rigid or vacuum-formed container.
1320
Case study
Euro para çıkarma testi
gereklilik Müşterinin 1 ve 2 Euro madalyonun iç kısmını dış parçalarından çıkaracak gücü bulması gerekiyordu.
1321
[Page extract]
ISO 7886-4
This document specifies requirements for sterile single-use hypodermic syringes made of plastic and rubber materials with or without needle, and intended for the aspiration of fluids or for the injection of fluids immediately after filling and of design
1322
[Page extract]
Yield point testing methods
Yield point testing is most often performed using tensile testing, in which a specimen is subjected to a steadily increasing axial load until plastic deformation occurs.
1323
[Page extract]
ASTM D7257-06
This test method of applying force may be used as a standard test to compare the characteristics of a given design of container/child-resistant closure system with a standard or to compare the characteristics of container/child resistant closure systems
1324
Case study
Industrial fixtures and fasteners
Requirement
SFS intec is a global supplier of precision components, special fasteners and mechanical fastening elements, with long-standing customer relationships, in the aerospace, automotive and construction industries.
1325
[Page extract]
Comparison of flexure testing methods
Method
Loading direction
Best suited for
Advantages