Search results
776
Accessory
Heavy-duty Vice Grip - Single Action, 20 kN, QC-20 fitting
Mec154-20
MEC 154-20 (body only - steel):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.…
777
Accessory
Coefficient of Friction COF Fixture (ASTM D1894), 10-32 UNF
432-144
Designed to measure the coefficient of friction (COF) to ASTM D1894, between two pieces of material.
The COF test determines the kinetic and static resistance of one surface being dragged across another.
This friction table can be mounted to the base…
778
Accessory
Float glass plates (10 pieces), 2" x 8" for FINAT 2 Peel Table
PSV15030
A set of 10 pieces of 2" wide x 8" long (51 x 203mm) float-glass plates. Used to mount adhesive specimens on when testing tensile peel strength to the requirements of FINAT and other standards.
For use with the FINAT 2 Assisted Peel Table - part number…
779
Accessory
Large Single-action Vice Grip, pyramid-faced, 2 kN, QC-20 fitting
432-267
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with pyramid-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides…
780
Accessory
Automated Syringe Batch Tester
PDV19179
The Automated Syringe Batch tester is a bench-top system for checking the ‘break-loose’ and ‘glide force’ of up to 12 individual syringes in one ‘load-and-run’ cycle. In the face of increased demand on production of syringes, this system enables larger…
781
Accessory
Upper Key-operated Chuck, square drive, for use with Vortex sensors
432-444
Upper ‘key-operated’ 4-jaw Chuck (small)
Fitted with a square-drive adapter for connection to 'Vortex' torque sensors. Supplied with dedicated chuck-key and 3 different sets of interchangeable jaws. Max.opening 50mm depending on jaws selected.
Used for…
782
Accessory
Fabric Grip, 100 N, 10-32 UNF
432-384
Fabric grips are designed for tensile and elongation testing of fabric and thin materials below 100N.
Material is gripped between two smooth spring-loaded faces which are clamped together by two locking nuts at either side of the grip to ensure the…
783
Accessory
MLTE 1000 Long Travel Extensometer
432-842
The MLTE 1000 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
784
Accessory
FPT-H1 loadcell calibration checking kit
432-635
For checking the calibration accuracy of loadcell type HILC used on the FPT-H1 Friction-Peel-Tear Tester.
Comprises a fixing plate with pulley, bench clamp and cord.
For use with Lightweight hanger and masses (part numbers 432-655 and 432-656).
785
Accessory
U-Form Vice Grip - Double Action, 5 kN, 50 mm opening, QC-20 fitting
Mec240g-S50
MEC 240g-S50 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
786
Accessory
Peel Grip for FPT-H1, 50 mm rubber-faced jaws, QC-8 fitting
432-654
This Peel Grip can be used in conjunction with the FPT-H1 90 degree peel fixture kit (part no. 432-620) or the FPT-H1 180 degree peel fixture kit (part no. 432-636). It is preferred over the standard hook fixture when the drawn part of the sample is non-…
787
Accessory
Heavy-duty Vice Grip - Single Action, 10 kN, QC-20 fitting
Mec154-10
MEC 154-10 (body only - aluminium):
A Single-action Heavy-duty Vice Grip allowing one jaw to be manually set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place…
788
Accessory
Small Parallel Grip, 500 N, M6
432-211
Small Parallel Grips are designed for tensile testing of small flat components and materials below 500N.
A floating ball screw attachment ensures central loading during tensile testing and wing screws are used to quickly position the jaws.
Jaw faces…
789
Accessory
Pull Peel Wheel Fixture, QC-20 fitting
432-265
The pull peel wheel fixture is designed for mounting to the base of a motorised test stand to test the peel strength of flexible adhesive-backed materials (eg. tapes).
Specimens are wound around the Pull Peel Wheel and the free end is clamped in a…
790
Accessory
Spring-action Vice Clamp, 200 N, 10-32 UNF
432-381
Spring-action Vice Clamp is fitted with adjustable serrated interlocking jaws to effectively grip specimens for tensile testing up to 200 N.
Ideal for gripping up to 16mm wide strips of film, paper, labels, tape and other thin materials for tensile and…
791
Accessory
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
792
Accessory
Wedge Grip for terminals for CrimpTest-1 kN
432-607
Wedge Grip for terminals for CrimpTest-1 Tester (supplied as standard with Tester)
The 1 kN Wedge Grip is ideal for tensile testing of flat crimp terminal and connectors when determining their pull strength.
A spring-loaded lever ensures the serrated…
793
Accessory
MLTE 700 Long Travel Extensometer
432-841
The MLTE 700 Long Travel Extensometer is designed to be used with Mecmesin test systems when running VectorPro MT materials testing software. It accurately measures strain directly from the test specimen to enable the most accurate calculation of the…
794
Accessory
U-Form Vice Grip - Double Action, 5 kN, 106 mm opening , QC-20 fitting
Mec240g-S100
MEC 240g-S100 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the…
795
Accessory
Cable tie break fixture for CrimpTest-1 kN
432-653
Cable-tie Break Fixture for CrimpTest-1
The Cable-tie Break Fixture comprises 2 split halves each having semi-circular stepped bollards for testing the tensile strength of cable-ties. There are 3 steps of 10 mm height steps to accommodate various length…
796
Accessory
U-Form Vice Grip - Double Action, 5 kN, 50 mm opening, QC-20 fitting
Mec240g-S50
MEC 240g-S50 (body only):
A U-form Vice Grip providing free adjustment of both jaws, allowing them to be aligned around the central axis to accommodate tensile testing of both symmetrical and asymmetrical specimens.
The ‘U-Form’ cut into the aluminium…
797
Accessory
Popper Cam Base, 1 kN, 10-32 UNF
432-179
The Popper Cam Base is used to secure the fabric when testing the strength of press studs ('poppers'), particularly on children’s clothing.
It is secured to the base of the test stand and the popper is fed through the retaining hole and positioned over…
798
Accessory
3-Point Bend Jig, 1 kN, Aluminium, T-slot base
432-248
A lightweight 3-point Bend Jig with 60 mm high upper and lower anvils of 1.5mm radius. Has a support span up to 120 mm.
Ideal for most low-force bending and snapping applications.
For use with T-slot base plate (432-294) - sold separately - to fit…
799
Accessory
Pneumatic Lift Mechanism to aid testing CRC closures on Vortex
PDV12112
Pneumatic Lift Mechanism to aid operation of Vortex Torque Testers when testing Child-Resistant (CRC) closures.
Raises and lowers the masses which are required as axial load to engage the child-resistant mechanism of closures.
Supplied with 50 N weight…
800
Accessory
Large Pneumatic Plane Grips, pyramid-faced jaws, 1 kN, Pair, QC-20 fitting
432-276
A pair of pneumatically-operated, single-action Large Pneumatic Plane Grips with an opening of 0-14 mm.
Each 30mm high x 51mm wide jaw is fitted with a pyramidal surface to secure specimens tightly. The specimen is held between the fixed jaw and the…