Search results
151
Case study
Syringe testing to ISO 11040-4 Annex F needle penetration and drag
Requirement
The medical syringe is an extremely important device, delivering (parenteral) injectable products to the patient by means of a cylinder and plunger mechanism.
152
Case study
Torque to twist out a champagne cork
Requirement
Sibel manufacture natural corks for the wine and spirits industry in the Champagne region of France. They pride themselves on working closely with their clients, taking into account their requirements and expectations for safety.
153
Product
Compression tester
SqueezerPro
820-525
Crafted to evaluate packaging performance, SqueezerPro offers powerful insights into the compressive strength performance of various board mediums, closures, interior partitions, and other critical design variables.
SqueezerPro can also be used to conduct…
154
Product
Máquina de teste universal
OmniTest 25/10/50
820-110
Nossa nova linha de máquinas de teste universais de bancada (UTMs) foi projetada para testes de tração e compressão de materiais, produtos e componentes. Esses versáteis sistemas de teste universais são conduzidos por nosso poderoso e intuitivo software…
155
Product
Automated bottle closure tester
ABC-t
The ABC-t is an automated bottle closure tester to measure both initial slip and bridge torque of a complete batch of roll-on-pilfer-proof (ROPP) closures.
Automated batch testing of closures ensures repeatability without the need for an operator during…
156
Product
Testador de força de coluna dupla
MultiTest-i
805-017
O MultiTest-i é um testador de tração e compressão versátil controlado por software executado em um PC. A linha de colunas duplas pode ser montada perfeitamente em sua bancada e é ideal para aplicações de teste de produtos de acordo com seus próprios…
157
Product
Testador de torque de tampa touchscreen
VTG Tornado
876-123
O testador de torque com tela de toque VTG Tornado é portátil e classificado como IP54 para testar o torque aplicado e de liberação de uma ampla gama de produtos. Mede até 10 Nm (90 lbf.in) para capturar o torque de abertura e fechamento de tampas /…
158
[Page extract]
486-C
ANSI/UL (incorporated standard)
486A-B: wired connectors (standard for safety)
486C: splicing wire connectors
486D: sealed wire connector systems
159
Case study
Forças de inserção e retirada do conector elétrico
Exemplo de engenharia customizada Os conectores elétricos push-fit com orifícios ou retentores côncavos (também conhecidos como 'terminais em espada') devem oferecer um encaixe firme, mas prático.
160
Case study
Dialysis needle sharpness test for patient comfort
Requirement
Kawasumi Laboratories Inc. was founded in 1957 as Japan’s first manufacturer of disposable plastic medical devices for blood collection and transfusion purposes.
161
[Page extract]
Software-controlled torque systems
Sophisticated power with easy of use
Looking for an automated torque testing system to improve the accuracy and repeatability of your measurements compared to manual torque testers?<
162
Case study
Soldas críticas de segurança em airbags de veículos
Requerimento O cliente exigia um sistema fácil de usar para a equipe de produção no chão de fábrica. O teste precisava ser realizado em um período mínimo de tempo e com muito pouco treinamento.
163
Case study
Surgical rubber glove tensile strength testing
Requirement
When selecting specialist gloves it is often the material strength and stretch which are the most important factors in determining quality and performance.
164
Case study
High Performance Plasma Coatings
Requirement
Alphatek Hyperformance Coatings Ltd. are a coatings company that applies wear, corrosion, heat or electrically resistive coatings, supplying to many different industries.
165
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
166
Accessory
FPT T-Peel Vice-Grips (pair) fitted with 25 mm rubber jaws
432-642
Double-action vice grips with rubber-faced jaws, typically for peel-testing on the FPT-H1 horizontal tester. 8 mm QC fitting. Sold as a pair.
A Lightweight Single-action Vice Grip used for peel and delamination testing of pressure-sensitive adhesives…
167
Accessory
Cone Point - 12 mm diameter, 5 kN, 5-16 UNC
432-359
A Cone Point probe of Ø 12.7 mm with angle of 60°.
For compression testing of various components or materials up to 5 kN.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
168
Case study
Testing rubber to materials standards
Requirement
Characterisation of materials is essential to have confidence in their performance in the manufactured products and components they are subsequently used in.
169
Case study
Ensaio de seringas de acordo com a norma ISO 11040-4 Anexo C2 Resistência à rutura do cone Luer
Requisitos
A seringa médica omnipresente é um dispositivo extremamente importante, que fornece produtos injectáveis (parenterais) ao doente através de um mecanismo de cilindro e êmbolo.
170
Case study
Watch bezel adjustment torque testing
Requirement
Since the revival of the mechanical watch industry during the mid 1980s enthusiasts have become ever more absorbed by mechanical chronometry, taking pleasure in comparing the performance of new and old models alike. The very finest
171
Case study
Bullet extraction and seating force testing
Requirement
When making ammunition, the projectile is set into the casing and it is crimped or sealed in place. The "neck" of the cartridge has natural tension but the crimp/sealant does the bulk of the work in keeping the projectile in place.
172
Case study
Insertion and withdrawal cyclic testing of aircraft audio connectors
Requirement
IFPL, based in the Isle of Wight, is a manufacturer of aircraft electronic interface components, bespoke audio and power products, plus turnkey solutions and services for their partners.
173
Case study
Jewellery testing to tensile strength standards for safety and durability
Requirement
From necklaces and rings to bracelets and earrings, manufacturers and importers of both high-end fashion and costume jewellery need to test for mechanical strength to ensure the safety and quality of their products.
174
Case study
Release Torque testing of Champagne and Sparkling Wine Corks
Requirement
Cork extraction strength from Champagne and sparkling wines is a critical quality-control parameter to measure.
175
Case study
Testes de força de ruptura e sustentação de cartuchos de medicamentos pré-preenchidos de acordo com a ISO 11608-3
Requerimento Canetas injetoras mecânicas para distribuição de drogas, como insulina, têm encontrado aceitação crescente em relação ao método tradicional de frasco e seringa.