Standards

Featured or equivalent test standards for Mecmesin solutions in this section

Term Video

<p><iframe allowfullscreen="" class="sproutvideo-player" frameborder="0" height="354" src="//videos.sproutvideo.com/embed/189bdcb71d18eec990/b6e410843875fbf7" width="630"></iframe></p>

Test summary


This part 5 of the ISO 9727 standard concerns the force needed to extract a cylindrical cork from a wine bottle. Samples of cork stoppers are selected in accordance with ISO 2859-1, ISO 3951 and ISO 4707. After conditioning for 24 hours, the corks are fitted into filled wine bottles then stored horizontally for eight days, after which the maximum extraction force is measured.



Test apparatus


Force testing stand

Force gauge or loadcell compatible with the force testing stand

Apparatus for clamping the bottle vertically on the force testing stand

Corkscrew of defined dimensions



Preparation


Corks are conditioned prior to testing for 24 hours at 23 ± 2°C and 50 ± 5%. RH.



Test method


Fill clean bottles to the correct level with a 10% solution of ethanol, and insert the cork.

After five minutes lay the bottle horizontally and store for eight days at 20 ± 2° C and humidity of 65 ± 5% RH.

Insert the corkscrew into the cork stopper until 3 mm can be seen outside the stopper.

Clamp the bottle vertically onto the test stand, and connect the corkscrew to the load measuring cell.

Withdraw the cork at a speed of 30 cm per minute while recording the extraction force.

Record the maximum extraction force, and report in decanewtons (daN).


Report

The test report shall contain:


All the information necessary for the complete identification of the sample; Reference to the method used; Results obtained, including average values and deviations; All operating details either not specified in the standards or regarded as optional; Any occurrence that may have affected the result; The number of test pieces use

전문가와 대화

제품에 대한 질문이 있습니까? 지금 기술 영업 엔지니어에게 전화를 요청하십시오.