Search results
Standards
Featured or equivalent test standards for Mecmesin solutions in this section
Test types
Further or specific test types in this section
Battery terminal weld integrity tensile test
“The MultiTest 2.5-i is very reliable and we have had no problems since we purchased it. Because it’s failure-free, accurate and has intuitive operation (very user-friendly software) it’s superior to the older control system from another supplier. It’s also worth to mention the after-sales support from ITA, Mecmesin’s Polish Distributor, is quick and efficient.”
Miroslaw Bratus, Production Purchase Coordinator
BMZ Poland Sp.z.o.o.
Cable and pipe pull-out force batch testing system
"We have made pull-out tests for many years, but with our new equipment, we get the result much quicker and with better accuracy. We can rapidly prepare and perform advanced tests and present the result in a more precise way for both customers and our colleagues, within research and development. The new equipment enables studies of how much force is needed to make a cable or pipe start moving within a seal. The test fixture was developed at CA Mätsystem AB (Mecmesin’s distributor) in Sweden, especially for Roxtec products, in order to enable a thorough testing of all existing Roxtec solutions. All results are stored in a database providing extended knowledge for future product development, as well as, useful information for customers and sales people."
Patrik Cederholm, Tests & Certificates Engineer
Roxtec International AB
Tensile test on rubber gaskets
We use the Mecmesin MultiTest 10-i system to perform regular quality control tests to guarantee the quality of our supplied materials. Mecmesin provided us with a cost-effective solution to our needs and exceptional customer service. I would have no hesitation in recommending them to other companies with materials testing requirements.
Michael Hubbard, Business Quality Manager
British Gaskets Group
Shoulder prostheses tensile testing
I am very pleased with both the service from Mecmesin and the MultiTest 10-x test system and would recommend it for testing many of the aspects of soft tissue repair in orthopaedics. The MultiTest 10-x is easy-to-use and ideal for this application, of testing the fixation of bones and tendons around a prosthesis inserted for fracture of the shoulder.
Mr Keith Borowsky, Orthopaedic Surgeon
University of Brighton Medical School
Battery terminal weld integrity tensile test
“The MultiTest 2.5-i is very reliable and we have had no problems since we purchased it. Because it’s failure-free, accurate and has intuitive operation (very user-friendly software) it’s superior to the older control system from another supplier. It’s also worth to mention the after-sales support from ITA, Mecmesin’s Polish Distributor, is quick and efficient.”
Miroslaw Bratus, Production Purchase Coordinator
BMZ Poland Sp.z.o.o.
"We have been using Mecmesin equipment to perform retention tests on our range of lancet needles for over 8 years. We find the system easy to use for regular in-process checks, and generally reliable with prompt servicing from Mecmesin when required."
John Potter, Quality Systems Engineer
Owen Mumford
Having an in-house test capability is essential when developing new processes and products. Having the Mecmesin tester at Cambridge Nanotherm has allowed us to reduce test cycles significantly. The software package also gives us the ability to analyse the subtle differences in adhesion mechanisms and also gives us the ability to produce detailed reports for our suppliers and customers.
Steven Curtis, Chief Engineering Officer
Cambridge Nanotherm Ltd
We use the MultiTest-x regularly, approximately 40 hours every week. It continues to be reliable and saves us money by enabling us to tests in-house. Mecmesin were able to offer advice regarding fixtures and designed an ideal solution for our testing needs, which remained competitively priced.
Tony Freeman, Director
William Lamb Footwear
Mecmesin은 질문에 대한 확고한 지원을 제공하는 고객 서비스를 제공하며 항상 필요한 결과와 답변을 제공합니다. 이 솔루션은 계속해서 우리에게 문을 열어주고 우리의 필요에 따라 성장합니다. 우리가 필요로한다는 것을 몰랐던 모든 것이었고 우리가 요청할 수있는 모든 것이 었습니다. 사용하기 쉽고 매우 사용자 친화적 인 소프트웨어를 사용하여 마스터 할 수 있으며 매일 사용하는 프로그램으로 변환 할 수 있습니다. Mecmesin과 함께 다음 단계로 나아가기를 기대합니다!
품질 관리자 Terri Lebow
Vintech Industries Inc.
유리 주사기 루어 락 부착 풀 오프
주사기 튜브 풀 오프 테스트
We have used Mecmesin equipment for a number of years to perform compression and tension tests on helical springs intended for use in our respiratory drug delivery devices. We now estimate that every second, more than a thousand people rely on a Bespak device to help them breathe and as our testing requirements have grown, so too has our relationship with Mecmesin. Today, we rely upon their advanced test systems to guarantee the quality of our supplied materials.
Peter Haken, Quality Engineer
Bespak
Having developed a medical device from a blank sheet of paper to a prototype level, we entered into a significant programme of test and development. Previous smaller test programs had used bespoke machinery developed in-house, which although suitable for the task, lacked versatility for the broad range of tests to be carried out, particularly from a programming standpoint. The test programme involved some 40 evaluations, to be conducted in a very condensed timeframe.
Stephen Gilmore, Principal Mechanical Engineer
Crux Product Design
The MultiTest 0.5-i is a very good and reliable machine and the Emperor™ Software brings great advantages. It’s a very useful tool for these kinds of tests. It’s fully programmable and offers an in-depth analysis of results. It’s a precious tool for everybody involved, especially those who work with plastics and their mechanical performance.
Nikos Michopoulos, Quality Control
Eurofilm Mantzaris S.A.
The MultiTest 1-i has been purchased to test the physical properties of raw materials and finished products. The 10N loadcell is able to measure to two decimal places, which gives a very sensitive and accurate reading, and this test works very well. The MultiTest 1-i meets our needs and with time has proved user friendly.
Adriana Jamesova,
Salts Healthcare
Amphibio has been using the Mecmesin Multitest 2.5i to assess the mechanical properties of single fibres, yarns and textiles made of various materials for their suitability in the sportswear and performance textiles market. We needed equipment that would be able to provide us with repeatable and reliable results whilst being easy to use. By using this equipment, we have been able to make key decisions going forward in our material development by determining yarns and fibres with the most suitable mechanical properties. The grips recommended to us as well as the software interface make testing efficient and easy, allowing us to obtain rapid results. Overall, we are extremely happy with the service offered by Mecmesin, particularly because they were able to accommodate our needs during difficult COVID times and were also able to offer us our desired equipment rental agreement period which fit with our budget.
Deana Tsang, Design Engineer
Amphibio Ltd
Combi Cork Extraction Tester는 설정이 쉽기 때문에 측정을 단순화하는 데 도움이되었습니다. 이 시스템은 작업자가 부상을 입을 위험없이 일관되게 재현 가능하고 안전한 측정을 제공합니다. 따라서 현재 품질 관리 측정 및 신제품 개발에 사용되는 귀중한 개방 토크 사양을 설정할 수 있습니다.
Dominique Rabiot, R & D 관리자
Oeneo Bouchage
“We were seeking a solution to improve repeatability, precision and documentation of our tests and also to automate our tests of the break force of plastic ear tags. We found an excellent solution with the MultiTest 2.5-xt equipment, providing not only precise measurements but also being easy to programme and having good software to produce test reports. We received excellent service from the supplier.”
Ole Klejs Hansen, Senior Advisor
RYK / Danish Cattle Federation
Cable and pipe pull-out force batch testing system
"We have made pull-out tests for many years, but with our new equipment, we get the result much quicker and with better accuracy. We can rapidly prepare and perform advanced tests and present the result in a more precise way for both customers and our colleagues, within research and development. The new equipment enables studies of how much force is needed to make a cable or pipe start moving within a seal. The test fixture was developed at CA Mätsystem AB (Mecmesin’s distributor) in Sweden, especially for Roxtec products, in order to enable a thorough testing of all existing Roxtec solutions. All results are stored in a database providing extended knowledge for future product development, as well as, useful information for customers and sales people."
Patrik Cederholm, Tests & Certificates Engineer
Roxtec International AB
Tensile test on rubber gaskets
We use the Mecmesin MultiTest 10-i system to perform regular quality control tests to guarantee the quality of our supplied materials. Mecmesin provided us with a cost-effective solution to our needs and exceptional customer service. I would have no hesitation in recommending them to other companies with materials testing requirements.
Michael Hubbard, Business Quality Manager
British Gaskets Group
Historically, SFS intec UK has had to rely on our colleagues in Switzerland for all our product testing and reporting needs. Whilst this produced efficient results, it became apparent that we required a more time friendly and responsive solution for our local customers, so we decided to bring it in-house. Now, with the use of Mecmesin machinery which has been integrated into our facility at Leeds, we are able to offer an additional tailored ‘testing’ service for our UK customers, often much more quickly, whilst producing detailed results and accurate data.
Craig Johnson, Technical Advisor SFS intec
SFS Intec
Shoulder prostheses tensile testing
I am very pleased with both the service from Mecmesin and the MultiTest 10-x test system and would recommend it for testing many of the aspects of soft tissue repair in orthopaedics. The MultiTest 10-x is easy-to-use and ideal for this application, of testing the fixation of bones and tendons around a prosthesis inserted for fracture of the shoulder.
Mr Keith Borowsky, Orthopaedic Surgeon
University of Brighton Medical School
전문가와 대화
제품에 대한 질문이 있습니까? 지금 기술 영업 엔지니어에게 전화를 요청하십시오.