Search results
1126
Accessory
Pyramid (serrated) jaws, 30 x 30 mm, 0.5 set
Mec240k-BP
Pyramid Jaws (30mm x 30mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1127
Accessory
Pyramid (serrated) jaws, 30 x 80 mm, 0.5 set
Mec240k-BP80
Pyramid Jaws (30mm x 80mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1128
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1129
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
1130
Accessory
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell
1131
Accessory
Extension Rod with nut, 30 mm, 500N, 10-32 UNF
432-116
Extension rod 30mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1132
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1133
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1134
Accessory
Heavy-duty Textile Grip, 50 kN, QC-32 fitting
432-434
Heavy-duty Textile Grips are designed for tensile testing of high strength fabrics, textiles and webbing, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are distributed,…
1135
Accessory
Mettler Toledo RS-P26 printer (Euro)
432-503
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 220V with plug (2-pin round)
Uses…
1136
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1137
Accessory
Pyramid (serrated) jaws, 30 x 50 mm, 0.5 set
Mec240k-BP50
Pyramid Jaws (30mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1138
Case study
Helical torsion spring torque testing
Requirement
Spring-loaded components are used extensively in home and consumer goods: clothes pegs, clips and old-fashioned mousetraps; small doors and flaps on cameras or hi-fi equipment; large doors and closures such as those on garages or g
1139
Software
Emperor Force 소프트웨어
Emperor™ Force 소프트웨어 거의 무한한 자유도를 가진 사용하기 쉬운 소프트웨어로, 필요에 맞게 인장 및 압축 시험을 설계하고 사용자 정의할 수 있습니다. Mecmesin이 고객과 긴밀히 협력하여 개발한 Emperor™는 현재 5,000개 이상의 회사에서 제품의 자세한 테스트 및 평가를 위해 신뢰를 받고 있습니다. 생산 라인에 대한 간단한 테스트와, 설계 표준을 충족하는지 확인하기 위한 더 복잡한 실험실 테스트를 만듭니다. 황제에 대하여
1140
Case study
Furniture webbing tensile strength test
Requirement
Supported by the Royal Household of Windsor Castle, a Buckinghamshire New University student was investigating the wear and strength properties of traditional English jute-based webbing, used in the construction and restoration of
1141
Case study
Watch bezel adjustment torque testing
Requirement
Since the revival of the mechanical watch industry during the mid 1980s enthusiasts have become ever more absorbed by mechanical chronometry, taking pleasure in comparing the performance of new and old models alike. The very finest
1142
[Page extract]
Applications across sectors
Texture testing in food manufacturing
Bread softness for freshness control, snack crispness for quality assurance, firmness in
1143
[Page extract]
Introduction to strip method tensile testing
Among the range of tensile testing techniques, the strip method is widely recognised for its accuracy and repeatability.
1144
[Page extract]
Introduction to the ring crush test
The ring crush test (RCT) is a key method for determining the edgewise compression strength of paper and paperboard.
1145
[Page extract]
Speak to an expert
Closure torque testing is vital for ensuring that packaging remains secure, protects contents, and is user-friendly.
1146
[Page extract]
Understanding torque testing
Types of torque testing in packaging
Several torque measurements are relevant to closure performance:
1147
[Page extract]
Case studies in puncture resistance testing
Protective clothing - A glove manufacturer used high-force puncture testing to optimise material layering, achieving compliance with ASTM F1342 and ISO 13996 while maintaining f
1148
[Page extract]
How peel wheel tests are conducted
Specimen preparation – The bonded material is cut to defined dimensions, ensuring uniformity of size and adhesive application.
1149
[Page extract]
Coefficient of friction (COF) explained
Understanding the COF formula
The coefficient of friction (μ) is a dimensionless value calculated as:
1150
[Page extract]
Step-by-step test methodology
Preparation
Sample selection - Choose representative specimens, avoiding faults unless deliberately testing them.
Specimen cutting - Cut to standard dimensions with a central slit of specified