Search results
276
Accessory
Square Perforated Aluminium Compression Plate, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36L-400-L6x20
MEC36L-400-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 400mm x 400mm.
Fitted with QC-20mm or 32mm…
277
Accessory
Rubber jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 60 x 200 mm
Mec83-BG200
Rubber-faced Jaws (60mm x 200mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For fragile samples, which may get weakened by…
278
Accessory
Split Mandrel for Stelvin aluminium closure, pneumatic
PDV14181
Suitable for Stelvin aluminium closures.
Pneumatically-operated chuck complete with half-round jaws with wire-eroded faces, for use with Vortex Upper Fixing Plate (432-321). Supplied with pneumatic valves and tubes.
Specify closure diameter when…
279
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 50 mm
Mec240g-BW
Wave Jaws (30mm x 30mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure a…
280
Accessory
Square Perforated Aluminium Compression Plate, 400 x 400 mm, QC-20 or QC-32 fitting
Mec36L-400-L6x20
MEC36L-400-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 400mm x 400mm.
Fitted with QC-20mm or 32mm…
281
Accessory
Square Perforated Aluminium Compression Plate, 200 x 200 mm, QC-20 or QC-32 fitting
Mec36L-200-L6x20
MEC36L-200-L6x20
Square Compression Plate in aluminium featuring perforations to allow air release during testing - suitable for foam testing. Holes are 6mm diameter and spaced at 20mm intervals.
Dimensions: 200mm x 200mm.
Fitted with QC-20mm or 32mm…
282
Accessory
Rubber jaws for Mec83 U-Form Pneumatic Vice Grip, 5 kN, 40 x 100 mm
Mec83-BG100
Rubber-faced Jaws (40mm x 100mm) - nickel-plated having 1mm thick layer of nitrile rubber coating.
Opening span = 0-10mm, 10-20mm or 20-30mm depending on which rod and piston are fitted to the Mec83 body.
For fragile samples, which may get weakened by…
283
Accessory
Wave jaws for Mec240g U-Form Vice Grip, 5 kN, 30 x 80 mm
Mec240g-BW80
Wave Jaws (30mm x 80mm) - nickel-plated having a hardened steel surface of 5mm tall waves.
Opening span = see datasheet for various spans according to the grip body selected.
For flexible but slippy materials which need more surface contact to secure a…
284
[Page extract]
ASTM F2923
This specification establishes requirements and test methods for specified elements and certain mechanical hazards in children's jewelry.
285
Product
Automated torque tester
Vortex-i
876-009
The Vortex-i is a top of the range torque tester controlled by software running on a PC. Accurate, easy to use and optimised for measuring static torque up to 10 N.m.
The ultimate flexible solution for automated torque testing of a wide range of closures…
286
Case study
Actuation force of pump dispenser
Requirement
The customer manufactures a range of dispensing pumps for the cosmetic and beauty-care industry. A requirement was identified to measure the actuation force of the pump assembly and the pull-off force of the pump handle.
287
Case study
Car door closure effort
Requirement
When shutting car doors, users need to apply a certain force to initiate the movement and ensure a complete closure.
288
Case study
Rotating Vacuum Peel System
Requirement
Testing was required for a range of flexible plastic trays of the same dimension but with differing forms, containing biscuits and confectionary.
289
Case study
Measuring shear strength of loose building materials
Customised engineering example
The shear strength of compacted materials (e.g. soil and sand) can be awkward to test.
290
Case study
Peel testing vacuum-formed containers
Customised engineering example
Semi-rigid thermoformed packaging, sealed by film or foil, is commonly tested by the '45-degree peel method'. This best represents how a person would open the package.
291
Case study
Instrument de vérification de force pour porte coulissante
Exigence
Un dispositif portatif est spécifié pour tester la force requise pour activer le dispositif de sécurité intégré sur la fermeture des portes automatiques des trains.
292
Page
Contact sales
Thank you for contacting our sales team
One of our Technical Sales Engineers or your local partner will be in touch soon.
293
Case study
Festive lighting masonry anchorage strength checking
Requirement
A number of local councils in the United Kingdom have adopted a new code of practice for the Installation, Operation and Removal of Seasonal Decorations.
294
Case study
Euro coins extraction test
Requirement
The Spanish producer needed to find out the force to extract the inner filler of the 1 and 2 Euro coin from their outer ring.
295
Case study
Test sur filtre à air
Exigence
Les tests suivants devaient être réalisés à partir d'un système simple à utiliser pour une série d'essais sur des filtres automobiles:
296
Case study
Syringe pump calibrator
Requirement
Medical device manufacturers, Cardinal Health, supply a range of syringe pump infusion systems to hospitals.
297
Case study
Adhesion peel strength of COVID-19 tapes and stickers
Requirement
In the wake of the Covid-19 lockdown, there have been clear guidelines issued to businesses on keeping staff and customers safe.
298
Product
Système d'essais automatique de friction, de pelage et de cisaillement
FPT-H1
817-001
Le FPT-H1-i est un système d'essais complet doté d'un logiciel fonctionnant sur un PC.
Précis et facile à utiliser, il est spécialement conçu pour tester le coefficient de friction, la résistance au pelage et à la déchirure d'une variété de matériaux.
299
Case study
Écrasement des comprimés pharmaceutiques et résistance à la rupture
Exigence
De nombreux produits se présentent sous forme de comprimés, avec une durabilité conçue à la fois pour l'emballage et son utilisation.
300
Case study
Using a UTM as a calibration tool for loadcells
Requirement
When it comes to configuring and calibrating a loadcell in tension and compression this can be a time-consuming process, particularly when the loads concerned are too high to use a set of calibrated weights (also known as ‘masses’)