Search results
1326
Accessory
Large Chain Link Assembly (short), 2.5 kN, 5-16 UNC
PSV8057
The Large Chain Link Assembly (short length) is fitted with a 5-16 UNC female thread and supplied with a male grub-screw.
It is fixed to other grips thereby allowing a flexible connection, which is often used for providing alignment when pulling large…
1327
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1328
Accessory
Heavy-duty Belt Grips, 10 kN, QC-20 fitting
432-277
Heavy-duty Belt Grips are designed for tensile testing of high strength belts and straps such as conveyor belts, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are…
1329
Accessory
Inverted Chisel Point - Ø 8 mm, 500 N, 10-32 UNF
432-356
For compression testing of cylindrical or wire specimens up to 500 N.
Specimen is located centrally within the inverted V-shape and compressed to a set distance or a break.
Fitted with a 10-32 UNF female thread for connection to loadcell
1330
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 10 mm opening, pair, QC-20 fitting
Mec240k+2Ko
MEC 240k +2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-10mm depending on the jaw types selected (sold separately).
Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1331
Accessory
Pyramid (serrated) jaws, 30 x 50 mm, 0.5 set
Mec240k-BP50
Pyramid Jaws (30mm x 50mm) - nickel-plated having a surface of hardened steel pyramids of 1.2mm tall.
For materials which need a “bite” to secure a good grip (e.g. soft metals {aluminium, copper, soft steel, paper and board)
Supplied as 0.5 set = 2…
1332
Accessory
Heavy-duty Textile Grip, 50 kN, QC-32 fitting
432-434
Heavy-duty Textile Grips are designed for tensile testing of high strength fabrics, textiles and webbing, which require special grips to prevent specimen slippage.
By winding the belt around the split bodies the stresses in the sample are distributed,…
1333
Accessory
Mettler Toledo RS-P26 printer (Euro)
432-503
A basic ticket printer with simple statistical analysis manufactured by Mettler Toledo.
Communicates with Mecmesin force gauges via RS232 serial link - order interface cable separately.
Supplied with mains-power adaptor 220V with plug (2-pin round)
Uses…
1334
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1335
Accessory
Extension Rod with nut, 30 mm, 500N, 10-32 UNF
432-116
Extension rod 30mm long supplied with locking nut to ensure alignment of grip. Comprises 10-32 UNF female to 10-32 UNF male threads.
Suitable for use with digital force gauges made from 1990 - 2006.
1336
Accessory
Pneumatic Medium Vice Grip - Double Action, 1 kN, 52 mm opening, pair, QC-20 fitting
Mec240k-S50+2Ko
MEC 240k- S50+2kO (body only) :
A pair of pneumatically-operated, Double-action Medium Vice Grips with an opening of 0-52mm depending on the jaw types selected (sold separately). Each grip is fitted with 2 x 50 mm diameter pneumatic pistons, which allow…
1337
Accessory
Diamond-coated Inset jaws, 0.5 set
Mec9-EBD
MEC9-EBD Diamond Jaws
Diamond-coated Inset jaws of 37 mm height x 15 mm width, 0.5 set. For fitting into the carrier of the MEC9 Thin Wire Grip.
Used when jaws need to bite into a soft material to clamp tightly and reduce the risk of slippage.(e.g. soft…
1338
Case study
Helical torsion spring torque testing
Requirement
Spring-loaded components are used extensively in home and consumer goods: clothes pegs, clips and old-fashioned mousetraps; small doors and flaps on cameras or hi-fi equipment; large doors and closures such as those on garages or g
1339
Case study
Test de seringue selon ISO 11040-4 Annexe C2 Résistance à la rupture du cône Luer
Exigences
La seringue médicale omniprésente est un dispositif extrêmement important, qui permet d'administrer des produits injectables (parentéraux) au patient au moyen d'un cylindre et d'un piston.
1340
Case study
Furniture webbing tensile strength test
Requirement
Supported by the Royal Household of Windsor Castle, a Buckinghamshire New University student was investigating the wear and strength properties of traditional English jute-based webbing, used in the construction and restoration of
1341
Case study
Test de la Résistance par Compression Verticale (RCV) d'une bouteille en plastique
Exigence
Silgan Plastics est une société américaine qui fournit des emballages pour les soins personnels, domestiques et automobiles. industrie pharmaceutique et alimentaire depuis plus de 50 ans.
1342
[Page extract]
Systèmes de couple contrôlés par logiciel
Performance sophistiquée - facile à utiliser
Vous recherchez un système d'essais de mesure de couple automatisé pour améliorer la précision et la répétabilité de vos mesures par rapp
1343
Case study
Watch bezel adjustment torque testing
Requirement
Since the revival of the mechanical watch industry during the mid 1980s enthusiasts have become ever more absorbed by mechanical chronometry, taking pleasure in comparing the performance of new and old models alike. The very finest
1344
Case study
Test de pelage sur panneaux solaires
Exigence
Un module solaire, également appelé module photovoltaïque et panneau solaire, est soumis à des conditions extrêmes de température, de rayonnement ultraviolet, de pluie, de verglas et de vent toute l'année.
1345
[Page extract]
Introduction to the ring crush test
The ring crush test (RCT) is a key method for determining the edgewise compression strength of paper and paperboard.
1346
[Page extract]
Speak to an expert
Closure torque testing is vital for ensuring that packaging remains secure, protects contents, and is user-friendly.
1347
[Page extract]
Understanding torque testing
Types of torque testing in packaging
Several torque measurements are relevant to closure performance:
1348
[Page extract]
How peel wheel tests are conducted
Specimen preparation – The bonded material is cut to defined dimensions, ensuring uniformity of size and adhesive application.
1349
[Page extract]
Introduction to strip method tensile testing
Among the range of tensile testing techniques, the strip method is widely recognised for its accuracy and repeatability.
1350
[Page extract]
Case studies in puncture resistance testing
Protective clothing - A glove manufacturer used high-force puncture testing to optimise material layering, achieving compliance with ASTM F1342 and ISO 13996 while maintaining f