Search results
1726
Accessory
Medium Vice Grip - Single Action, 1 kN, 30 mm opening, QC-20 fitting
Mec240k-S30
MEC 240k-S30 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1 kN in…
1727
Accessory
Grosser Fadenspannzeug, 2 kN, Schnellwechsel-Befestigung QC-20
432-271
Dieser grosser Fadenspannzeug ist aus Stahl und wurde für das Testen bis 2 kN von flexiblen Drahtmaterialien mit maximaler Dicke 2 mm entwickelt.
Die Probe wird um den Poller herumgewickelt und das freie Ende des Probenkörpers wird zwischen 2 flache…
1728
Accessory
QC Type L Adapter, 32 mm M, c/w pin and fixing screws
432-451
QC Male Post 32mm c/w cross-pin, locking collar…
1729
Accessory
Large Single-action Vice Grip, rubber-faced, 2 kN, QC-20 fitting
432-267-V01
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with rubber-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides excellent…
1730
Accessory
Exzentrischer Rollenspannzeug - Walze mit Pyramidenrändelung, 10 kN, Schnellwechsel-Befestigung QC-20
Mec7-10
MEC7-10 Exzentrischer Rollenspannzeug
Inkl. 60mm breite Walze mit Pyramidenrändelung. Wenn eine Last auf eine Probe aufgebracht wird, zieht sich die Nockenscheibe selbsttätig und verteilt die Last gleichmäßig.
Der Hebel ermöglicht ein schnelles…
1731
Accessory
Lightweight Mini Vice Grip, 5 N, M6
432-281
By virtue of its spring loaded clamping action the Lightweight Mini Vice Grip is ideal for testing ultra low forces.
Weighing only 30 g it holds specimens without the need to tighten jaws by a thread, which may damage low-capacity loadcells or even the…
1732
Accessory
Cone Point - 8 mm diameter, 500 N, 10-32 UNF
432-358
A Cone Point probe of Ø 8mm with angle of 60°.
For compression testing of various components or materials up to 500 N.
Typically used where compressive force needs to be applied at a point or for penetration into a material over a short distance.…
1733
Accessory
Medium Vice Grip - Single Action, 1 kN, 52 mm opening, QC-20 fitting
Mec240k-S50
MEC 240k-S50 (body only) :
A Medium Single-action Vice Grip allowing one jaw to be manualy set in a position to align a test specimen around the central axis. The other jaw is freely adjustable to mechanically clamp the specimen in place.
Rated to 1…
1734
Accessory
Transit Case for Manual Handling/Ergonomic Kit
416-007
A foam-lined rugged metal case for the components of the advanced or basic manual handling kit. Supplied as standard with the kit, has space for: a force gauge including rechargeable batteries, mains adaptor / battery charger, gripping cradle, chain link…
1735
Accessory
MDD Horizontal Feet Kit
432-126
Feet for the horizontal operation of an MDD manual test stand. Supplied as a pair.
1736
Accessory
Self-levelling Compression Plate Steel - 196 mm, 50 kN, QC-32 fitting
MecS223g-196
MecS223g - 196mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates - ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel,…
1738
Accessory
Clevis Grip (small), 500 N, M6
432-216
Small Clevis Grip fitted with female M6 thread and supplied with male grub-screw.
Used for securing odd-shaped parts for testing tensile forces below 500N.
1739
Accessory
Adapter, 5 kN, 5-16 UNC to M12, M to M
432-331
Male-to-male Adapter
Allows a grip to be connected to a force gauge/loadcell or test stand where thread connections are different.
1740
Accessory
Self-levelling Compression Plate Steel - 156 mm, 25 kN, QC-20 fitting
MecS223k-156
MecS223k - 156mm diameter:
Self-levelling allows exact parallelism to be set between the upper and lower plates.. ideal for those applications where it is critical to accurately measure the deformation of a sample.
The MecS223 range of hardened steel…
1741
Accessory
16 mm Traverse-Verlängerung
432-307
Mit der Traverse-Verlängerung von 16mm kann die Kraftmessdose an einem einsäuligen Multitest Prüfstand von der Säule weiter weg positioniert, um Platz für grössere Proben zu machen.
Die maximale Nennkraft des Prüfstandes wird um 25% reduziert.
1742
Accessory
Scherenspannzeug, 50 kN, Schnellwechsel-Befestigung QC-32
Mec11-50
MEC11-50 Scherenspannzeug (Körper ohne Backen)
Selbstspannende und selbstausrichtende Spannzeug für Scherprüfungen bis 50 kN.
Mit Schnellwechsel-Befestigung QC-32.
Mit Einrastfunktion: Das Spannzeug rastet im geöffneten Zustand ein (nicht bei Verwendung…
1743
Accessory
Compression Plate, Nickel-plated, Vented by Slots & Flat, 50 mm, 10-32 UNF
432-346
Vented compression plates are ideal for top-load/crush testing of containers such as PET bottles.
Slots in the plate allow the passage of air to ensure that air inside the bottle is not compressed thereby falsifying the true measurement of the top-load…
1744
Accessory
Druckknopf-Abzieh-Vorrichtung mit 3 Backen, 500 N, 10-32 UNF
432-409
Diese Druckknopf-Abziehvorrichtung hat 3 Backen und eine Drehfunktion zur sicheren Einklemmung von Druckknöpfen mit 13 bis 15 "Lignes".
Wird für Zerstörungstest zum Ausziehen des Druckknopfes vom Textilstoff.
In der Regel mit dem "Druckknopf-…
1745
Accessory
Miniature Vice Grip, 100 N, QC-20 fitting
MecS341
Versatile, easy to use, and suitable for small components (eg bonded joints) where access is limited and tensile forces are below 100 N.
Clamping surfaces are machined with pyramid-shaped serrations to ensure optimum gripping force.
The flexible chain-…
1746
Accessory
PSV12129 Split mandrel cork grip
PSV12129
A Split Mandrel Grip comprising an outer body with lead-screw and handles. Used for adjustable positioning of half-round jaws having wire-eroded serrated faces.
Designed specifically to grip natural corks of 26-32 mm diameter when testing the release…
1747
Accessory
Kleiner Fadenspannzeug, 100 N, Schnellwechsel-Befestigung QC-20
432-270
Dieser kleine Fadenspannzeug ist aus Aluminium und wurde für das Testen bis 100 N von feinmechanischen, flexiblen Proben wie zum Beispiel feinen Fäden, feinen Drähten und Schnüren entwickelt, die sehr einfach nach Einspannung brechen könnten.
Die Probe…
1748
Accessory
Compression Plate, Hardened and Ground, 175 mm, 5-16 UNC
432-446
Hardened and ground compression plates have a smooth, scratch-proof surface ideal for compression testing on samples that could damage a standard compression plate, such as springs.
175mm diameter having 5-16 UNC female thread.
1749
Accessory
Pin Chuck, 100 N, M6
432-214
Pin chucks are specifically designed for gripping circular or rod-type specimens of diameters between 0.5 - 3.5mm.
For tension and compression testing below 100N.
Fitted with adaptor having M6 female threaded hole & M6 grub-screw
1750
Accessory
Large Single-action Vice Grip, pyramid-faced, 2 kN, QC-20 fitting
432-267
A Large Single-action Vice Grip featuring one fixed jaw and one jaw as freely adjustable to mechanically clamp the specimen in place.
Rated to 2 kN in tension with pyramid-faced jaws of 78mm wide x 28mm high having an opening of 0-9mm. Provides…