Testing Solutions
-
Medical Suture Device Calibration System
Medical Suture Device Calibration System
Specification
A number of devices which 'crimp' a curved needle to a fine medical thread needed to be tested. The crimp force was applied horizontally pulling a lever on the device.
A test system was required to verify that the force applied to the device was within the specified tolerance, and was repeatable over a number of tests.
Solution
The VersaTest motorised stand was adapted for horizontal operation by using a simple feet kit.
The medical suture device was mounted on an 'L' bracket, with a dowel pin to secure it in position. An 'eye-loop' was connected to the force gauge on a clevis-pin and the connected to the lever device.
The lever was then pulled at a test speed of 300mm/min with peak tension force being recorded on the AFG. The first data acquisition speed of 1200 Hz for the AFG, produced results more repeatable than those produced by the previous test system.
System
- 50N AFG
- VersaTest Motorised Test Stand
- Horizontal Feet Kit
- 'L' Bracket and Flexible Eye-Loop'
Supplied to
Glaxo Wellcome, Poznan, Poland
Products used in this case study
Other case studies using these products
- Aluminium Cap Break-off Force
- Elongation Test of Infusion Solution Bag
- Needle Retention Test
- Car Window Sliding Force Tester
- Festive Lighting
- Lighting Weld Test
- PCB Component Pull-off Test
- Cap Removal Test of Plastic Phial
- Needle Pull-out Test
- Euro Coins Extraction Test
- Medical Suture Device Calibration System
- Metatarsophalangeal Joint Tester
- Cap Application & Removal Force
- Cork Extraction Test
- Cosmetic Packaging Pull-Off Test
- Dispensing Pump Assembly Testing
- Flip-Cap Opening Force Test
- Foil Lid Peel Test
- Induction Peel Testing
- Plastic Film Tension Test
- Rotating Vacuum Peel System
- Tamper-Proof Closure Push-Out Test
- Top-Load Test
- Toy Testing
- Train Door Closing Force
- Wall-Mounted Air Freshener Load Test
- Balloon Cloth Tensile Strength Test
- Bow Pull-Off Test
- Button Pull-Off Test
- Diamante Pull-Off Test
- Press-Stud Popper Pull-Off Test
- Tamper-evident Ring Test
- 3-Point Bend Test for Rigid Polyurethane Foam
- Airbag Connector Pull Test
- Connector Test On Fuel-Injection Components
- Lipstick Bullet Breakage Test
- Toothbrush Tester
Other case studies in Testing Solutions
- Screw Retention Force Of Building Materials
- 3-Point Bend Test for Rigid Polyurethane Foam
- Tamper-evident Ring Test
- Touch Screen Actuation Force Test
- DVD Removal Force Test
- Screw Torque of Pump Dispensers
- Soldered Flexi-Circuits Tensile Test
- Granule Hardness Test
- Champagne Cork Extraction
- Top-Load Semi-Automated Test
- Aircraft Brake Unit Spring Testing
- Aluminium Cap Break-off Force
- Tennis Ball Compression Test
- Drug Delivery Device
- Elongation Test of Infusion Solution Bag
- Peel testing for Health Care Products
- Needle Retention Test
- Texture Evaluation of Fruit Snacks
- Slicing Properties of French Bread
- Medical Pouch Heat Seal Joint Tensile Test
- Medical Spring Test
- Shoulder Prostheses Testing
- Cricket Ball Testing
- Golf Ball Deflection Test
- Airbag Connector Pull Test
- Car Window Sliding Force Tester
- Plasterboard Testing
- Solenoid Testing
- Dashboard Button Testing
- Filter Test Station
- Connector Test On Fuel-Injection Components
- Seat-Belt Locking Device Test
- Window & Sunroof Torque Tester
- Lipstick Bullet Breakage Test
- Electrical Harness Terminal Testing
- Festive Lighting
- Flat, Quick-connect Terminations
- Lighting Weld Test
- Mobile Phone Keypad Life Test
- PCB Component Pull-off Test
- PCB Pull & Shear Test
- Thin Film Peel Testing
- Delamination Peel Test
- Cap Removal Test of Plastic Phial
- Needle Pull-out Test
- Car Door Closing Energy Tester
- Euro Coins Extraction Test
- Railcar Spring Testing
- End Float Test of Inhaler Cap
- Medical Device Testing
- Medical Suture Device Calibration System
- Metatarsophalangeal Joint Tester
- Syringe Pump Calibrator
- Cap Application & Removal Force
- Cap Removal
- Closure Torque Tester Validation Check
- Coefficient of Friction Test
- Cork Extraction Test
- Cosmetic Packaging Pull-Off Test
- Dispensing Pump Assembly Testing
- Flip-Cap Opening Force Test
- Foil Lid Peel Test
- Packaging Tension Test
- Induction Peel Testing
- Seed Container Closure Torque Testing
- Plastic Film Tension Test
- Rotating Vacuum Peel System
- Sachet Compression Test
- Tamper-Proof Closure Push-Out Test
- Top-Load Test
- Torque Tester for Dedicated Caps
- Plastic Component Tension Test
- Page Pull Strength Test
- Tensile Test on Rubber
- Toothbrush Tester
- Tray Crush Test
- Child Safety Force to Access Lighter
- Child Safety Force to Extract Lighter
- Door Slam Force Tester
- Toy Testing
- Scaffold Support Netting Tester
- Train Door Closing Force
- Wall-Mounted Air Freshener Load Test
- Balloon Cloth Tensile Strength Test
- Bow Pull-Off Test
- Button Pull-Off Test
- Diamante Pull-Off Test
- Press-Stud Popper Pull-Off Test
- Footwear Materials
- Medical Guidewire Break Strength Test
